How many hours of safety training should be provided for part-time and short-term employees when hiring?

Industrial Safety and Health Education · Practical Recruitment Materials

How many hours of safety training should be provided for part-time and short-term employees when hiring?

How to set training hours via employment contract and complete them before starting work on the first day (Calculation table Excel)

Many companies hire part-time and short-term workers all at once ahead of year-end events or peak seasons. Frequently asked questions at this time include, “Do I need to provide safety training even to those working for just a few days?” and “How many hours is it?”

If you are a workplace subject to mandatory safety and health training, you must provide training to part-time workers as well when hiring them. The training time is not based on a day's work hours. How and for how long the employment contract was concluded It is determined as follows. Below, we will examine how to set the time, differences depending on the industry, and how to operate on the first day, in that order.

📌 Three things to check first
① Is the end date specified in the employment contract? ② Is the contract period one week or less, one month or less, or longer? ③ What is our company's industry and the number of regular employees? Knowing just these three pieces of information allows you to determine the required training hours. Simply enter the data into the accompanying Excel spreadsheet, and the time will be calculated automatically.

🧾 Are part-time workers also subject to safety training upon hiring?

Yes, it is a subject. The Industrial Safety and Health Act stipulates that employers must provide safety and health training necessary for the relevant work to employees when hiring them. This training is referred to as "training upon hiring."

"Part-time job" is not a legal term. Whether you are a student or a housewife, and whether you work for just one day or several months, if you enter into an employment contract, you are considered a worker. Therefore, the excuse that "training was skipped because it is a part-time job" does not hold water.

However, depending on the industry and size, there are some places where this obligation does not apply at all, such as retail businesses with fewer than 50 regular employees. Please check the 'Industry and Size' section below to see if your company falls into this category.

⏱️ How is the training time determined?

The training hours upon hiring are specified in Annex 4 of the Enforcement Rules of the Industrial Safety and Health Act. The standards are Whether they are daily workers, fixed-term workers with a set contract period, or other workers It is. How many hours a day you work or how many days a week you come in is not the standard.

Who is it? Training hours upon hiring To put it simply
Daily workers, fixed-term workers with an employment contract period of one week or less more than 1 hour Contracts on a daily basis or contracts ending within 7 days
Fixed-term workers whose employment contract period exceeds one week but is one month or less More than 4 hours Contracts ending in 8 days or more but less than a month
Other workers More than 8 hours Contracts longer than one month, contracts with no end date (including part-time jobs with short working hours)

Here, a 'daily worker' refers to a person who enters into an employment contract on a daily basis, and whose employment relationship ends when the day's work is finished, with no guarantee of continued employment. A 'fixed-term worker' is a person who has entered into an employment contract with a fixed end date.

What about a part-time job working 2 to 3 days a week for 4 hours a day? If the contract does not specify an end date, the worker is classified as an 'other worker,' and the standard is 8 hours or more. Please note that there are no regulations in Appendix 4 that allow for a reduction in training hours simply because the working hours are short.

🧩 Where does our company's part-time job fall?

In reality, the form of the contract often differs from the actual work environment. Below are hypothetical examples summarizing situations frequently encountered by the person in charge. The judgment is always Actual employment contract Please refer to this and do it.

Situation (Hypothetical Example) Where does it apply? Training upon hiring
Personnel working on a daily basis for weekend events daily workers more than 1 hour
December 26–December 31 Short-term Inventory Clearance Contract Fixed-term work of one week or less more than 1 hour
December 1st – December 24th Year-end peak season contract Fixed-term contract exceeding one week but less than or equal to one month More than 4 hours
Winter break contract from December 1st to February 28th of the following year Fixed-term workers (other workers) for more than one month More than 8 hours
Store part-time job working 15 hours a week with no end date Other workers More than 8 hours
Personnel who signed a daily contract but were scheduled to work every day for three weeks Difficult to regard as a daily worker (judged as fixed-term, etc.) 4 hours or 8 hours or more, depending on the contract terms

The last case is also mentioned in the Ministry of Employment and Labor's Safety and Health Education Guide (2026). It explains that even if the contract is in the form of a daily worker, if it stipulates continuous attendance for a set period, it should be treated the same as a regular worker (including fixed-term workers). Conversely, it states that if the worker is free to decide whether to attend work and the employment period is not specifically defined, they can be considered a daily worker.

When judgment is ambiguous, it is safer to provide training based on a longer period. This applies to cases involving extending a contract or rehiring the same person. Safety and health training post by an employee who rejoined after leaving the company I have organized it separately.

🏪 Does it vary depending on the industry and scale?

Yes, it changes. You must verify this, especially in industries that employ a large number of part-time workers. The industry is determined based on the Korean Standard Industrial Classification. Since it may differ from the business type on the business registration certificate, please check what the main business is first.

Our company Training upon hiring is reason
Wholesale businesses with fewer than 50 regular employees, accommodation and food service businesses (cafes, restaurants, etc.) More than half of the table time (e.g., 8 hours → 4 hours or more) Note 3 of Annex 4 of the Enforcement Rules
Retail businesses with fewer than 50 regular employees (excluding automobiles), arts, sports, and leisure service industries, etc. Exempt from mandatory training upon hiring. However, special training for hazardous work must be provided. Article 3 of Annex 1 of the Enforcement Decree
Software development, finance and insurance, business support services, etc. Exempt from mandatory training upon hiring. Special training must be performed. Article 2 of Annex 1 of the Enforcement Decree
Workplaces with fewer than 5 regular employees Exempt from mandatory training upon hiring. Special training must be performed. Article 6 of Annex 1 of the Enforcement Decree

For example, if a cafe with 30 employees hires part-time workers without a set end date, the standard is at least 4 hours, which is half of an 8-hour workday. Even if the scale is the same (30 employees), mandatory training does not apply to retail businesses such as convenience stores.

When counting the number of regular employees, do not exclude part-time and short-term staff. If the number of people increases to nearly 50 during the peak season, it is advisable to check the calculation method with the competent labor office. Even in industries not subject to mandatory requirements, it is recommended to inform new employees of evacuation routes and who to contact in case of an accident.

🔁 What about experienced workers in the same industry or returning day laborers?

You can also save time when hiring experienced candidates. If you hire someone within one year of changing jobs who has worked for at least six months in the same industry according to the Korean Standard Industrial Classification (KSIC) sub-category, you only need to complete half of the required training hours. Do not judge candidates based solely on their resumes; instead, obtain verifiable documentation such as a certificate of employment.

There is one additional exception for daily workers. If they return to the same workplace to perform the same work for one week after receiving training upon hiring, they are not required to undergo training again. If training was conducted on Tuesday, the exemption applies until the following Monday, but if a new contract is signed the next day, new training must be provided.

If the industry type reduction and the experience reduction overlap, each is halved. According to the table in the Ministry of Employment and Labor guide, for restaurants with fewer than 50 employees, the minimum required time for hiring a worker with experience in the same industry for one week or less is 0.25 hours (15 minutes). However, this is only the minimum time, so if the task to be assigned is dangerous, please explain it more thoroughly.

Reduction and exemption are Only after verifying the requirements Please apply this. You must verify the number of regular employees, industry classification, proof of experience, and whether the work is the same as the previous training date using documents such as employment contracts. If it is unclear, consult the competent regional employment and labor office, and it is safer to conduct the training based on the basic hours before verification.

🚪 When and how is the training conducted on the first day of work?

Training upon hiring is Before starting work You must do so. The Ministry of Employment and Labor's guidelines state that regarding whether hiring training can be divided into multiple sessions, it must be conducted before job placement. Saying, "I will teach you in your spare time while you work," is unlikely to be recognized as hiring training.

If the company conducts the training in-house, who can teach it? The Safety and Health Manager, supervisors, safety and health managers, and safety and health management personnel can do so. It can also be entrusted to an external safety and health training institution. If you intend to use online courses, please first verify that the course meets the distance education standards set by the Ministry of Employment and Labor.

The content of the training is also determined. Annex 5 of the Enforcement Rules mandates that training at the time of hiring include content such as accident prevention and evacuation, risks of machinery and equipment and work procedures, pre-work inspections, and emergency measures in case of an accident. In addition to this, Prevention of job stress, prevention of health problems caused by workplace harassment and verbal abuse from customers It also includes... Below is an example of a one-hour training session divided. This is not a legally mandated timetable.

Order (1-hour example) Try proceeding like this
① 10-minute tour of the workplace Show them the locations of the entrances, emergency exits, and fire extinguishers by walking through them, and have them say where to go if a fire breaks out.
② Tasks and Dangers 15 Minutes Please show the sequence of tasks to be performed today and the machines and tools used, and point out places where hands could get caught or falls could occur.
③ 10 minutes of pre-work inspection and tidying Please tell me what to check before starting (wet floors, pathways, protective equipment) and how to clean up after finishing.
④ 10 minutes in case of injury or accident Please let me know who to notify immediately if I get injured, the location of the first aid kit, and contact information.
⑤ A place to talk for 10 minutes when you're having a hard time Please let me know who I should report to if I experience verbal abuse or harassment from customers, rather than enduring it alone, and if the company has a counseling channel, please let me know how to contact them.
⑥ Questions and Understanding Check 5 minutes Have them answer one or two questions directly, such as “Where do you go if there is a fire?” and have them sign the record.
💬 Try saying this on the first day (example)
"I will start with safety training before we begin work. It will take about an hour. Please feel free to ask me anything you don't know right now. If you encounter any difficulties with a customer while working, please don't keep it to yourself; let me know immediately."

If you are working a part-time job where you directly interact with customers, please pay special attention to number ⑤. What the company should do when there is customer verbal abuse is Post protecting employees suffering from customer abuse You can view more details at.

📝 How do I keep records, and what happens if I don't?

If you conduct training, record the date, actual start and end times, the trainer, the content covered, and the signatures of the trainees. Keeping a copy of the employment contract as well makes it easier to explain why the duration was set at one or four hours. You must not record the training time as longer than it actually was, nor count those who did not show up as having attended.

Failure to provide training upon hiring may result in a fine. The amount is 100,000 won for the first training session, 200,000 won for the second, and 500,000 won for the third and subsequent sessions per training-eligible worker (Table 35 of the Enforcement Decree of the Industrial Safety and Health Act). For example, if 10 part-time workers are assigned without training, the penalty is 1 million won even based on the first instance, and the legal limit is 5 million won or less.

If a part-timer plans to work for a long time, please ensure they are eligible for regular semi-annual training in addition to the initial hiring education. For employees directly engaged in sales, the standard is at least 6 hours per half-year. The eligibility criteria and hours for regular training are as follows. Industrial Safety and Health Education Target and Time Checklist Article Please check here.

📎 Use Excel calculation tables like this

The included Excel file is designed to quickly determine the required training time for each hire and to record the first day of training. You only need to enter information in the yellow cells.

Input table If you select Employment Type, Contract Start/End Date, Industry/Size, and Experience in the Same Industry, the basic hours before reduction and reference hours reflecting reduction or exemption will be displayed separately. Rows marked with 'Separate verification required' will appear, so please confirm the requirements before finalizing. The first six lines are a hypothetical example, so please review them, delete them, and write. Training time standards The sheet contains Appendix 4 and the criteria for reduction and exclusion from application.

First Day Training Checklist This is a sheet to check whether the training content for recruitment in Appendix 5 has been covered item by item. Educational record book If you enter the actual start and end times, the training time and whether the standards were met will be displayed. The links to the verified laws and guides are reason Try opening it directly from the sheet.

The calculation table is merely a tool to aid in judgment and does not replace a legal decision. If the industry classification or employment type is ambiguous, please check with the competent regional employment and labor office.

📎 Training Hour Calculation Table for Hiring Part-time & Short-term Staff

📥 Download Recruitment Training Calculation Table

👉 For sites with many temporary employees, if you prepare training and mental health support together

New employees find it difficult to speak up even in dangerous situations. The workplace becomes safer if safety rules are taught along with information on where to turn to help when struggling during the first day of training. Review the operation of mandatory legal training and the scope of employee psychological counseling support in conjunction with Nudge EAP.

Inquiry about Nudge EAP Implementation →

📚 Verified Official Data · Date of Legal Verification: 2026.11.12.

Article 29 (Safety and Health Education for Workers) and Article 175 (Administrative Fines) of the Occupational Safety and Health Act [Effective Oct. 27, 2026]
Articles 26 and 27 of the Enforcement Rules of the Occupational Safety and Health Act [Effective Aug. 1, 2026]
Table 4 of the Enforcement Rules of the Occupational Safety and Health Act (Training Hours by Safety and Health Education Course)
Table 1 of the Enforcement Decree of the Occupational Safety and Health Act (Businesses or Workplaces Not Subject to Partial Application of the Act) [Effective Aug. 1, 2026]
Table 35 of the Enforcement Decree of the Occupational Safety and Health Act (Criteria for Imposing Administrative Fines)
Article 2 (Definitions) of the Act on the Protection, etc. of Fixed-term and Part-time Workers
Ministry of Employment and Labor, 2026 Safety and Health Education Guide (July 2026, based on laws effective July 1, 2026)

This is a general guide. Results may vary depending on industry classification, employment type, and whether the work is subject to special training. Please verify actual application with relevant laws and the guidance of the competent regional employment and labor office.

How was this expert column?
Comments3
  • Unknown User3
    근로계약서 사본을 교육 기록이랑 같이 보관하라는 팁 좋네요. 왜 1시간으로 했는지 나중에 설명할 근거가 되겠어요
  • Unknown User2
    첫 출근 날 일 시작 전에 끝내야 한다는 부분은 현장에 다시 공유해야겠어요. 바쁘면 일단 투입하고 나중에 하자는 얘기가 꼭 나와서요
  • Unknown User1
    하루 근무 시간이 아니라 계약을 어떻게 맺었는지로 교육 시간이 정해진다는 게 핵심이네요. 주 3일 짧게 일하는 알바는 시간을 줄여도 되는 줄 알았어요ㅠ

Most Engaging Posts in the Community

See more in Best Posts (Real-Time)